10pc Socket Set - 1/2in.Dr
For special automotive applications -
With 3 | 6 and 10 Point Sockets and
10mm | 12.5mm | 14mm | 19mm Pentagon Sockets

Torque Multiplier Set with 5:1 Ratio
1/2in.Dr to 3/4in.Dr for Ford EcoBoost Engines
This torque multiplier set allows the correct mounting position
and correct tightening sequence to be applied to the crankshaft pulley bolts.
The tool is mandatory when working on the following Ford engines :
1.0 EcoBoost | 1.0 and 1.1 Duratec | 2.0 Duratorq-TDCi | 2.0 EcoBlue Diesel.
OEM Codes : 303-1611 | 303-1611-01 | 303-1611-02

Adjustable Pin Wrench Set
with Interchangeable Pins
for nuts with top holes as found on Wheel Pulleys.
Divider type adjustment with central knurled knob.
Supplied with 8 pins / 4 pairs.
Pin size : 2.5 - 4mm | 3 - 5mm | 6 - 8mm | 7 - 9mm.
Plus 10 / 11mm Spanner.
Suitable for DIN 547 bearing nuts.

Fuel Pump Sprocket Puller
for Ford Transit 2.2L TDCi
From 2011 fuel pump sprockets no longer have threaded holes fitted in them
this tool allows the pump removal without removing the timing chain.
Applicable to : Ford Transit from 2011 with 2.2L TDCi Puma engine.
Also Land Rover Defender 2.2L TD4 / 2001 - 2015
OEM Codes : 303-249 | 303-249/01

VAG Pump Pulley Remover
For the removal of the high pressure pump hub
on 1.6L and 2.0L TDi common rail diesel engines.
OEM Code : T40064

Stretch Belt Mate Kit
For universal installation and removal of stretch belts.
Allows removal and reuse of stretch belts.
Designed to meet your specific needs.

Elastic Ribbed Belt Tool Kit
For the quick and easy removal and installation of Elastic Ribbed Belts
fitted to modern auxiliary drive systems
such as the alternator or power steering.
Suitable for most vehicle makes and models

2pc Stretch Belt Tool Set
Universal tool set for fitting stretch belts to modern vehicles.

5pc Auxiliary Belt Tension Set
for Ford and PSA Diesel Engines.
Provides a safe and controlled method of adjusting the
tensioner position during removal and installation of the auxiliary belt.
Includes various adaptors along with an extension bar
to allow an extended reach on the raised peg which
can then be used with and appropriate tensioner wrench
and low profile thin walled socket.
Applicable to : 1.4 | 1.5 | 1.6 | 2.0 | 2.2 Diesel Engines.

Auxiliary Stretch Belt Removal Tool
BMW | Chrysler | Citroen | Fiat | Ford |
Iveco | Mazda | Mercedes | Peugeot | Volvo

Alternator Stretch Belt Tool Kit
For Mounting and Dismounting Alternator Stretch Belts
without Damaging Pulleys and Belts.
With Belt Installers - 32 | 45 | 50mm Diameter
Belt Remover
Self Locking Nut / M8 Fixing Nut and Screws -
M8 x 25 - 5.9mm D
M8 x 40 - 5.7mm D
M8 x 53 - 5.7mm D
M8 x 65 - 5.6mm D Short and Long

Universal Stretch Belt Tool Kit
For use mainly on 1.4 and 1.6 petrol engines
when the double width crankshaft puller restricts access
preventing the belt from being removed or installed.
Use with a 17mm socket.

5pc Damper Pulley Wrench Set
18in. / 460mm Long
for holding and retaining the auxilliary belt pully in place.
Sizes : 13 | 15 | 16 | 17 | 19mm
Ideal for use in confined spaces were access is restricted.
Suitable for all European Vehicles

32mm Fan Clutch Nut Wrench
BMW Water Pump Removal Tool Kit
32mm Fan Clutch Wrench
Double-ended Water Pump Fan Pulley Holder
For removing water pumps on models with
temperature dependent viscosity drive fans.
Removes lock nuts on thermo-Viscous fans.

32mm Fan Hub Wrench for BMW / Ford
270mm Long
For holding the Visco-clutch drive shaft on BMW and Ford vehicles.
Especially slim design with PVC dipped handle
Enables easy access

36mm Fan Hub Wrench for Ford / Opel
270mm Long
For holding the Visco-clutch drive shaft on Ford / GM / Opel vehicles.
Especially slim design with PVC dipped handle
Enables easy access

41mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

46mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

2pc Viscous Fan Spanner
with Fan Hub Holding Tool

10pc Fan Clutch Wrench Set
With Fan Pulley Holding Tools
Fan Clutch / Nut / Hub Wrenches
Range from 37mm to 83mm
Range from 1-7/16 to 3-1/4in.

Pneumatic Fan Clutch Wrench Set
for use with Air Tools
Wrench Sizes : 32 | 36 | 40 | 47 and 7/8 | 1-7/8 | 2in.
For removing and installing the fan clutch
when repairing the water pump or fan clutch.
Compatible with Ford / GM / Chrysler and Jeep vehicles.
With Carry Bag.

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Applications : Ford vehicles 2010 - 2015
C-Max / B-Max / Ecosport / Edge / Fiesta / Focus
Galaxy / Kuga / S-Max / Transit Courier
OEM Code : 412-134

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles 2010 - 2017
C-Max / Focus / Kuga / Transit Connect / Courier / Ka / Fiesta.
OEM Code : 412-154

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2012 -
Transit and Transit Custom Hybrid PHEV.
OEM Code : 412-157

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2008 - 2015
Fiesta / from 2008
B-Max / from 2012
C-Max / from 2010 & 2015
OEM Code : 412-103

Universal Camshaft and Crankshaft Pulley Holder
Holds camshaft or diesel pump sprockets and gears
for removal and tightening of retaining bolts.
Interchangeable pins : 3.5 | 4 | 4.5 | 5 | 6 | 7 and 10mm.
Wrench swivels to adjust from 32 - 127mm
1/2in.Dr for use with ratchets or power bars.

Camshaft Belt Pulley Tool
Mini Cooper Serpentine Belt Tool - R50 / R53
For loosening the camshaft pulley then using the
pin to lock the camshaft pulley tensioner in place
allowing the removal and replacement of the timing belt.
Applicable : BMW Mini Cooper - R50 / R53
BMW engine W10/W11

Camshaft Belt Pulley Tool
Mini Cooper Serpentine Belt Tool
For loosening the camshaft pulley then using the
pin to lock the camshaft pulley tensioner in place
allowing the removal and replacement of the timing belt. br> Applicable : BMW Mini Cooper engine S/W11

Flat Belt Tension Spanner Set
For BMW / Mini engines EP3 / EP6 / N12 / N14 / N16 and N18 >2007
For releasing the tension when removing and installing the serpentine belt.
Wrench Sizes : 21mm / 30mm with 12-point drive
OEM Code : 116210

Auxiliary Belt Tension Spanner
VAG 1.4 Tsi / TFSi Belt Drive Petrol Engine
Designed to provide access to the auxiliary belt tensioner.
1.4 direct injection 4cyl TSi and TFSi Blue Motion engines.
VAG OEM Tool : T10447

Heavy Duty Pulley Puller
Adjustable Jaw Tension
Pulls pressed-on 1 and 2 groove pulleys
For Alternators and Power Steering Pumps / also Alternator Bearings

3 Jaw Pilot Bearing Puller
Suitable for sleeve-type bearings : 16 - 50.8mm diameter.
Ideal for flywheel bearings / pump bearings and generator / starter bearings without tilting the bearings or damaging the bearing race.
For servicing motor vehicles / motorcycles and lawn mowers etc.

Adjustable Timing Pulley Puller
This tool is designed for removing drive pulleys with face grooves.
Removes pulleys without risk of damage.
Adjustable Legs for different pulley diameters.
For removing pulleys with 3 | 6 | 9 slots.

2 Jaw Pulley Remover
Jaw Length : 72 - 95mm
Jaw Depth : 18mm
Ideal for most vehicles and for use in confined spaces.

Universal Pulley Puller
18mm pulling legs.
8 Slots for holding pulling legs in different positions.
16mm Diameter spindle with cantering ball.
Use with 24mm Socket or Spanner.
Draws pulley by the holes without causing damage.
Movable legs adapt to different pulley diameters.
Suitable for different bolt patterns and distances.

VW R2/T4/A3 Camshaft Pulley Puller
Ideal for removing rusted or seized pulleys.
For in-situ car maintenance.
Adjustable legs fit different diameters of pulley.
VW T4 use six hook
AUDI A3 use five hook
R2 use six hook

Power Steering Pump Pulley Kit
For Ford | Chrysler and GM vehicles
With Saginaw / Thompson/ Ford C111
and C2 power steering pumps.
Fits many pulley hub diameters including
engines with a metric shaft.

Pulley Puller and Installer Set
Removes pressed-on alternator and power steering pulleys
For late model GM / Ford and Chrysler engines
Adapters for Quad 4 engines
Adapters for Ford modular engines

Puller for Ribbed Drive Pulleys
Length - 200mm | Height - 80mm
Low Profile suitable for most vehicles
Knurled Screws - included
Hex Keys

10pc Belt Pulley Puller Set
For removing and installing belt pulleys
power steering pumps / generators and fan wheels etc.
2 cross beams : 140mm and 230mm long
2 pairs of straight pullers : length 60mm and 110mm
1 pair of specifically formed pullers : length 60mm
All pullers and cross beams can be combined
Suitable for pulley diameter up to 200 mm

VAG Cambelt Pulley Holder
For VW 1.4 / 1.6 / 2.0 litre engines
Also for 4 valve engines with pin diameter 11.5 mm
and counter holding the belt pulley of 2 valve engines.
Applicable to : Audi / Skoda / VW vehicles

VW Installation and Tension Lever for ribbed belts
Adjustable automatic belt tension tool with
removable head for maximum flexibility.
Applicable to : VW ASN and BBJ
T4 / Golf / Passat and Polo.

5pc Master Cam Clamp Kit
This universal kit reduces repair time and covers
most Single / Twin and Quad cam engines.
Locks camshafts during belt replacement.
Prevents engine damage due to incorrect timing.
Allows easy operation in small engine bays.

Cambelt Tension Gauge
Precise Measurement
Universal - Suitable for Cambelts of various widths
Dual Direction Rotating Scales with Clear Incremental Markings

Mercedes Auxilliary Belt Tensioner Tool
For tensioning and loosening the damper spring without damage.
on Mercedes-Benz W169 | W245 Engines
with air conditioning and / or stop-start function :
Suitable for following vehicles :
A-Class W169 / 2004 - 2012
A150 | A160 | A170 | A180 | A200 | A200T
B-Class W245 / 2005 - 2011
B150 | B160 | B170 | B180 | B200 | B200T
OEM Code : 266589003100

Mercedes V-Belt Tensioning Tool
For setting the tension wheel and fitting the ribbed belt.
Suitable for Mercedes models : 168 | 169 A-Class | 245 B-Class
Length : 620 mm
Size : 15mm

Timing Belt Tension Setting Tool Kit
for engine compartments with restricted access.
Ideal for releasing tension on serpentine belts.
Suitable for most vehicles.
3/8in.Dr x 580mm Long with 1/2in.Dr extension
3/8in.Dr Crowfoot Wrenches : 13 | 14 | 15mm
3/8in.Dr Sockets : 15 | 16 | 18mm

Subaru Crankshaft Socket
1/2in. Drive
For aligning the crankshaft to T.D.C
when working on timing chain servicing or replacement
on 3 or 6 cylinder DOHC engines.
For Subaru models 2006 - 2012 - 2015.

5pc Cambelt Tension Pulley Wrench Set
E-Star Sizes : E10 | E12 | E14 | E16 | E18
For biasing the auxiliary belt tension off and on
during installation of the belt in the vehicle.
Slim curved handle for use in confined spaces.

VAG Camshaft Adapter Socket
3/8in. Drive / S45C Steel.
Use to rotate and hold the intake camshaft during timing chain service
on 4 cylinder 1.8L and 2.0L TFSi generation III direct injection engines.

15pc Cambelt Tension Wrench Set
With Interchangeable Heads
for tensioners on auxiliary and timing pulleys.
Includes bar with locking system.
Star : E10 | E12 | E14 | E16 | E18
Sizes : 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm

9pc Cambelt Tension Wrench Set
with Interchangeable Heads
For tensioners on auxiliary and timing pulleys
Sizes : 12 to 19mm
Includes bar with locking system.

6 Belt Tensioner Retaining Pins
For use on Automatic Belt Tension Systems in vehicle engines.

Camshaft Locking Tool
for Audi | Ford | Seat | Skoda | Volkswagen | Volvo
Essential for setting and locking the camshaft
and crankshaft when changing the timing belt.
Includes :
Setting spigot OEM ref.23-047/2064
Setting bracket OEM ref.21-105/2065A

BMW N47 Diesel Crankshaft Locking Tool
For locking the crankshaft in timing position.
Required when replacing one of both timing chains.
Used to measure the amount of chain stretch without dismantling the whole engine.
Applicable to BMW N47 1.6 and 2.0L diesel engines from 2013.

BMW / Mini Camshaft Drive Chain Wear Indicator
For checking the timing chain stretch on BMW Mini petrol engines
without dismantling the engine.
Applicable to Mini Clubman / Club Van / Countryman / Coupe
Paceman and Roadster with 1.4L and 1.6L engines.
Also useful on equivalent PSA engines.
OEM Code : 2353281

BMW Front Crankshaft Timing Case Cover Remover / Installer
For correcting alignment of the front crankshaft timing case cover / at bottom
also helps prevent damage to the new seal during fitting.
Applicable to : BMW 1 | 2 | 3 | 4 Series - X1 | X2
Mini Clubman / Hatch / Countryman.

BMW Front Crankshaft Seal Installer
For removing or installing the front crankshaft oil seal on
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54
BMW model engines.

BMW Crankshaft Oil Seal Kit
For removal and installation of the rear crankshaft oil seal.
Applicable to :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54.

BMW Crankshaft Seal Tool Set
For removing and installing the front and rear crankshaft seal.
Applicable to :
N20 / N26 / N40 / N42 / N45 / N45T
N46 / N46T / N52 / N53 / N54 / N55
OEM Codes : 119220 | 119230 | 119235

Ford Crankshaft Holding Tool
Prevents the crankshaft moving when releasing
or tightening the crankshaft pulley fasteners.
The unique head profile permits access via a deep socket to each of the pulley bolts.
Applicable to : Mondeo and Transit 2.0 / 2.2 / 2.4 / 3.2 litre -
Duratorq Di / TDDi / TDCi Diesel and 2.3 Duratec HE petrol engines.
NOTE : Deep socket is not supplied.
OEM Code : 303-1310

Ford Crankshaft Damper Holding Tool
for 2.0 / 2.3 / 2.5 litre engines
Applicable to : Fusion / Transit Milan / MKZ Escape / Ranger Mariner
plus Hybrid Vehicles.

Crankshaft Pulley Tool
Ford / Volvo 1.8 | 2.0 | 2.3 - 16V Duratec Chain Drive Engines.
For counter holding the crankshaft pulley while
the pulley retaining bolt is loosened or tightened.
Ford : C-MAX | Fiesta | Focus | Galaxy | Mondeo | S-MAX |Transit
Volvo : C30 | S40 | S80 | V50 | V70
OEM Code : 9997218

Mercedes Crankshaft Oil Seal Installation Kit
Used to install the front and rear crankshaft oil seal.
Applicable to:
M102 | 111 | 112 | 113 | 137 | 156 | 159 | 272 | 275 |
285 | 601 | 602 | 603 | 604 | 605 | 606 | 628 | 629.
OEM Code :119589011400 | 11589084300

Mercedes Crankshaft Oil Seal Installation Kit
Specifically designed to install crankshaft front and rear seals
on Mercedes M651 diesel engines .
OEM Code : 651589006100 | 651589016100

Citroen / Peugeot Petrol Engine Camshaft and Crankshaft Seal Installer Kit
Citroen / Peugeot Petrol 1900-2000

Crankshaft and Camshaft Seal Remover and Installation Kit
Includes 2 Seal removers for multiple applications
Angled blades for removing seals in limited access

Crankshaft Seal Remover / Installer Kit
Seal sizes - 27mm and 58mm in diameter.
Universal covering a wide range of vehicles.
Use the existing bolt in the vehicle for installation.
Screw-type adapter to aid cantering the seal.
With Aluminium Blue Seal Adapters to prevent crank damage.

BMW Crankshaft Pulley Holder
For holding the crankshaft pulley while loosening or tightening
the middle pulley bolt then removing and replacing vibration dampers.
Applicable to : BMW N47 and N57 engines.
Vibration Damper Brace
Holding Sleeve and Screw : M8 for N47 / N57
Holding Sleeve and Screw : M10 for N47TU / N57TU

BMW Mini Crankshaft Turning / Holding Kit
Specially designed to rotate the crankshaft and fix the flywheel.
Crankshaft Pulley Turning Tool
Flywheel Drive Plate Holding Tool
Securing Bolt and Spacer
Flywheel Bolt Socket

BMW Flywheel Locking Tool
for BMW / MINI engines -
N40 to N73 | M47TU | M54 | M57T2/TU | S85 | W17.
With Counter Holder / Spacer Sleeves /
Reduction Sleeve and Mounting Screws.
For locking the flywheel when loosening or
tightening the pulley and the flywheel itself.

BMW Crankshaft Harmonic Balance Tool
for BMW 3 & 5 Series.
Engines : E39 | E46 | E60 | E61 | E81 | E83 | E90 | E91
Holds vibration damper when loosening and tightening centre crankshaft bolt.

Oil Pump / Balance Shaft Alignment Kit
for BMW 1 | 2 | 3 | 4 Series - 6L / 2.0L Petrol Engines.
For fixing the balance shaft and holding the chain sprocket
when used for repairing the chain and sprocket wheel drive.
Applicable to Engine Codes : N20 | N26 2012 - 2017
OEM Codes : 2 212 825 | 2 318 117 | 11 4 120

Balance Shaft Tool Set
For adjusting the balance shaft on the following vehicles :
JLR : ED4 | TD4 | TD4E / 2009 - 2015.
Citroen : C5 | C5 II | C5 III | C6 | C8 | C-Crosse Hdi / 2000 - 2015.
Mitsubishi Outlander : DI-D | DI-OC / 2007 - 2013.
Peugeot : 4007 | 407 | 607 | 807 | 406 | 508 | 607 | Hdi | GT Hdi / 2000 - 2015.
Ford : Galaxy | Mondeo | S-Max | TDCI | TCI / 2018 - 2015.

Harmonic Damper Holding Tool - Honda
1/2in.Dr 50mm offset socket
For maintaining the harmonic damper pulley position
while removing / installing the pulley bolt.
Use with a 1/2in.Dr Ratchet or Power Bar.

JLR Crankshaft Pulley Tool Set
Crankshaft Pulley removal and holding tool
For Jaguar / Land Rover vehicles.
The Crankshaft Pulley needs to be removed for engine servicing.
Applicable to
Jaguar 3.2 | 3.5 | 4.2 V8 engines
Land Rover 4.2 | 4.4 V8 engines
Engine codes: AJ26 | AJ27 | AJ28 | AJ34

JLR Crankshaft Pulley Service Set
For the removal of the front crankshaft pulley / crankshaft vibration damper
fitted to Jaguar / Land Rover 3.0L V6 and 5.0L V8 Petrol Engines.
The crankshaft pulleys are tightened to 200Nm + 270 degrees
so are very tight to undo and must be held by the holding tool in this kit.
Also included in this kit are the components required to remove the pulley safely.
Applicable to : Jaguar / Land Rover and Range Rover Vehicles - 2009 to 2018.

Crankshaft Harmonic Balancer Holding Tool
for Mercedes 1.6 | 1.8 from 2002 to 2018
Designed to securely hold the Harmonic Balancer / crankshaft pulley
while undoing or tightening the crankshaft pulley fixing bolts
in Mercedes 1.6 and 1.8L petrol engines on -
C / CLC / E / CLS / SLK / CLK Class / Sprinter.
OEM Code : 271589004000.

Crankshaft Pulley Retaining Tool
for PSA / Toyota 1.0L | 1.2L Petrol Engines
For holding the front crankshaft pulley mount
while loosening or tightening the central camshaft bolt.
Fits both 3 and 6 bolt fixing pulley hub types.
Applicable to : Citroen / Peugeot / DS / Opel / Vauxhall and Toyota models.
Engine Ref : EB0 1.0L | EB2 1.2L - 3 cylinder wet belted engines.
Use with 1/2in.Dr Power Bar or Ratchet.

Balance Shaft Puller with Slide Hammer
For VAG 1.8L | 2.0L 4 cylinder petrol chain driven injection engines.
Audi - 2007 to 2017
Seat - 2006 to 2017
Skoda - 2007 to 2017
Volkswagen - 2007 to 2017
OEM Code : T10394

Universal Harmonic Balance Puller
Installation and Removal Tool Kit
with Puller Plate and 4 sets of 3 screws
Centre bolt 10mm and 9 adaptors
For use on the crank pulley damper /
crankshaft damper / torsion damper
or vibration damper for drive belts

Harmonic Damper Pulley Puller
for Chrysler / GM / Hyundai and Mazda
3-Jaw Puller with 3 Lengths of Forcing Rods.
Puller separates the harmonic balancer from the crankshaft.
With harmonic balancer holding tool for tightening or loosening
the crankshaft bolt or removing the balancer.

46pc Harmonic Balance Puller Set
Removes Harmonic Balancers / Gear Pulleys
Steering Wheels and Crank Shaft Pulleys
Zinc Plated Yoke and Bolts
5in. Pressure Screw
Small Cantering Adaptor
Large Cantering Adaptor
Flat Shaft Adaptor

VAG Camshaft Pulley Holding Tool Set
For holding the pulleys and sprockets on the
camshaft / crankshaft / oil pump and water pump
while loosening and tightening the fixing bolts.
also suitable for the Common-Rail Diesel Pump-Nozzles
Suitable for Audi | Seat | Skoda | Volkswagen models.

Audi / VW Crankshaft Pulley Holding Tool
For holding the crankshaft pulley when removing or installing the crankshaft central bolt.
AUDI : A3 | A6 | Q5 2004 onwards
VW : TSI / TFSI engines with chain 1.8T | 2.0L 4V
OEM Code : T10355

Porsche Vibration Damper Counter Holder
Vibration damper counter holder for Porsche 970 / 92A
Used to counter hold the crankshaft pulley during removal and installation.
Applicable to : Porsche 4.8L V8 / 2010-2018
OEM Code : 00072196791

VAG Vibration Damper Assembly Tool
Specially designed to fix the timing chain drive sprockets
while installing and removing the vibration damper on
VAG 1.8L / 2.0L TFSi / TSi EA888 engine.
Applicable to Audi / Seat / Skoda / Volkswagen
Vibration damper holding tool.
Crankshaft sprocket holding tool / adapter and nut.

DAF Commercial Vehicle Crankshaft Alignment Tool
This heavy duty tool allows crankshaft rotation via the flywheel.
6 point drive x 24mm x 11 teeth
Applicable to 35T DAF trucks :
65CF | 75CF | 85CF | 95XF | CF75 | CF85
F65 | F75 | F85 | F95 | XF95

Crankshaft Alignment Tool
1/2in.Drive with 2 gears
Used in conjunction with 1/2in.Dr Ratchet
Allows the engine crankshaft position to be manually rotated.
Applicable to :
MAN 12 cylinder engines and
Mercedes 6 / 8 and 10 cylinder engines.

Ford Camshaft Sprocket Puller
Size 90 x 65mm
Applicable to - F8M | F8Q | S8U | S9U
Also suitable for removing the Impeller.
Also found in Timing Tool Set CT3429

JLR Balance Shaft Service Kit
for Jaguar / Land Rover 2.0L Diesel Engines
Designed for the removal / refitting and setting of the balance shafts
on the Jaguar Land Rover AJ200 2.0L Diesel Engines.
Applicable to:
Jaguar E-Pace / F-Pace / XE / XF
Land Rover Discovery / Sport
Range Rover Evoque / Sport / Velar

4pc Camshaft Adjuster Set
for Mercedes V6 / V8 - M152 / M157 / M276 / M278 Vehicles
Camshaft Position Sensor Reluctor Setting Tools
Used to mark pulse wheel on removed camshaft.
Can be used in conjunction with CT4076
OEM Code : 278589002300

41mm Water Pump Wrench - 1/2in.Dr
For use on older GM - Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Also used on Chevrolet / Daewoo vehicles.
Engines : 1.2 / 1.3 / 1.4 / 1.6V / 1.6D / 1.8
OEM Codes : KM421A | J-42492 | J-42492-A

46mm Water Pump Wrench - 1/2in.Dr
For use on older Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Engines : 1.6 ( 87 ) 1.7D / 1.8 ( 87 ) / 2.0 litre
OEM Code : KM409A

Cam Belt Tensioning Tool
T50 Star Bit - 1/2in.Dr
Allows access to the tensioner adjuster on
Renault K4M / K4J 1.4 and 1.6 petrol engines.
May be used with 1/2in.Dr Adaptor and Ratchet
OEM Code : MOT1368

VAG Crankshaft Turning Adaptor
22mm Square with 12mm Rotating Pivot Pin
Dual Drive : 1/2in.Dr plus 24mm Hex
Used for turning the crankshaft pulley.
Applicable to : 2.4 | 3.2 | 4.2 FSI Engines.
OEM Code : T40058

VAG Crankshaft Seal Flange Remover and Installer
for 1.4 and 1.6 - 16 Valve VAG engines
fitted to Audi / Skoda / Fiat and VW vehicles
Specific tool vital to ensure the correct alignment
of the main seal house crankshaft sensor.
The Seal housing carries the crankshaft sensor mounting.
OEM Code : T10017

VAG Crankshaft Seal Flange Installation Tool
Designed to renew the crankshaft oil seal on Audi / VW vehicles
Applicable to 16V / 20V - 1.9 / 2.0 Diesel Engines since 2006.
For 4 Valve Diesel engines with integrated sender wheel.
Audi A3 4-cyl. VW Golf / Touran
OEM Code : T10134

VAG Crankshaft Oil Seal Tool
Designed for VW 2.5 TDI | 2.5 Blue TDI Engines.
The flywheel end oil seal is integral with the oil seal housing
and speed sender and is supplied with a new timing ring.
If the oil seal is faulty then the whole assembly must be renewed.
Suitable for VW Crafter 2.5L / 2006 - 2013
Engine Codes : BJJ | BJK | BJL | BJM | CEBA | CEBB | CECA | CECB
OEM Code : T50010

VAG Crankshaft Rotation Tool
for VAG 5 Cylinder Engines
Necessary for crankshaft adjustment and as use as a lever.
Suitable for all 5 cylinder VW diesel engines -
VW touareg as of 2003 and transporter as of 2004
Fixing screw allows easy mounting on crankshaft.
OEM Code : T10225

VAG Camshaft Drive Tensioner Wrench
For adjusting the Camshaft drive belt tensioner on
VAG Vehicles with 1.0 / 1.2 / 1.4 turbo charged engines.
Applicable to :
Audi - A1 / A3
Seat - Mii / Leon
Skoda - Octavia / Citigo
Volkswagen - Up / Golf V11
OEM Code : T10499

VAG Timing Chain Tension Lever
for 1.8 / 2.0 TFSi Petrol Engines
Allows the timing chain tensioner to be retracted and locked
without removing the lower timing cover.
Applicable to TFSI engines from 2007 onwards
on Audi / Seat / Skoda / Volkswagen models.
OEM Code : T40243

Water Pump Tester Kit
For testing cooling system water pumps in situ while the engine is running.
Indicates the coolant flow by measuring pressure rises
that occur due to the coolant flowing around the block.
Gauge : 0 - 15psi
Rubber Pipe Seals and Blanking Plugs
2 part Pipe Connector Body
2M Nylon Hose and Male Connector